Maintenance and replacement of key components of filter non-woven fabric processing equipment (Shopping - Wholesale)
Item ID 2514362 in Category: Shopping - Wholesale
Maintenance and replacement of key components of filter non-woven fabric processing equipment | |
The good condition of key components of filter non-woven fabric processing equipment is essential for producing high-quality products. The following are the key points for the maintenance and replacement of these key components. As one of the key equipment, the roller components of the carding machine need to be checked regularly. If the roller surface is worn or entangled, it will affect the fiber combing effect. During maintenance, professional tools should be used to clean the entanglement, and the rollers with severe wear should be replaced in time. The degree of wear can be judged by measuring the roller diameter and surface roughness. When the diameter decreases beyond a certain range or the roughness does not meet the requirements, a new roller should be replaced. The needle of the needle loom is a vulnerable key component. The needle tip is easily worn and blunted during the frequent puncture of the fiber. During daily maintenance, pay attention to the puncture effect of the needle. If uneven puncture or abnormal holes are found on the non-woven fabric, it may be a needle problem. Regularly check the sharpness and integrity of the needle with tools such as a microscope. When replacing needles, choose a model that matches the equipment, ensure that it is firmly installed and neatly arranged, and ensure that the needle density and angle meet the process requirements. In thermal bonding equipment, the heating roller is the key. Regularly clean the impurities and fiber residues on the surface of the heating roller to prevent them from affecting heat transfer and the surface quality of non-woven fabrics. Monitor the working status of the heating roller through temperature sensors and pressure sensors. If there is uneven temperature or abnormal pressure fluctuations, check the heating element and hydraulic system. When the heating roller is partially not heated or the surface is deformed, it needs to be replaced in time to ensure the stability of the thermal bonding process. In addition, the transmission parts of various equipment, such as belts, chains, etc., should be checked regularly for tension and wear. Adjust the tension appropriately. If there is severe wear and cracks, replace it immediately to avoid affecting the entire processing process due to unstable transmission. Maintaining and replacing the key components of the equipment can effectively improve the service life and production efficiency of the equipment. | |
| Related Link: Click here to visit item owner's website (1 hit) | |
| Target State: All States Target City : All Cities Last Update : 07 November 2024 6:37 PM Number of Views: 22 | Item Owner : hai Contact Email: Contact Phone: (None) |
| Friendly reminder: Click here to read some tips. | |
© 2024 AUNetAds.com
USNetAds.com | GetJob.us | CANetAds.com | UKAdsList.com | INNetAds.com | CNNetAds.com | Hot-Web-Ads.com | USAOnlineClassifieds.com
2024-11-24 (0.222 sec)